See other engines in this family
Pontiac 134ci 3.386" bore specs: 134 ci (2.2L) 4-cylinder, 3.386 x 3.724 in (86 x 94.6 mm) bore and stroke. Built 2007–2008. Rod ratio and piston speed.
With a 3.724" stroke over a 3.386" bore, the Pontiac 134ci 3.386" bore is undersquare by 9.1%, so expect the 134 to pull low rather than rev. Piston speed on the 134 (3.724" stroke) gets to 4,000 ft/min near 6,450 rpm, the usual ceiling for stock rods and pistons. A 1.538 rod ratio is short, so the 134's rods run at a steep angle with more side load and harder piston acceleration, as in most strokers. Each of the 134's 4 cylinders displaces 33.5 ci (549 cc).
The Pontiac 134ci family has 2 engines, all 134 ci, so what sets the 134 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, from 2007 to 2008.
| Displacement | 134 ci / 2.2 L |
|---|---|
| Bore | 3.386" |
| Stroke | 3.724" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 10:1 |
| Rod length | 5.728" |
| Rod ratio | 1.538 |
| Bore/stroke ratio | 0.909 |
| Piston deck clearance | 0.018" below deck |
| Induction | SFI |
|---|---|
| NHRA filed HP | 148 hp |
| Years | 2007–2008 |
| Bore/stroke character | 0.909, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,724 ft/min (typical performance street range) |
| Rod ratio | 1.538 (short, more side load (common in strokers)) |
| Displacement per cylinder | 33.5 ci |
| Intake valve diameter | 1.382" |
|---|---|
| Exhaust valve diameter | 1.185" |
| Chamber volume | 50.7 cc |
These open with the 134's bore, stroke and compression already entered.
All 2 versions of the 134 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 2007 | 148 hp | — |
| 2008 | 148 hp | — |