See other engines in this family
Pontiac 301ci (1977) · 135 hp specs: 301 ci (4.9L) 8-cylinder, 4.002 x 3.01 in (101.7 x 76.5 mm) bore and stroke, 9.521:1 compression. Rated 135 hp, 1977.
The Pontiac 301ci (1977) · 135 hp is oversquare — the 4.002" bore exceeds the 3.01" stroke by 33.0% — a layout that favors airflow and RPM over leverage at the crank. The 3.01" stroke does not reach 4,000 ft/min of mean piston speed until about 7,950 RPM, so piston speed is not what limits this engine's revs — valvetrain and breathing are. A rod ratio of 2.01 is long by production standards — less side-load on the cylinder wall and gentler piston acceleration around TDC, the geometry that tolerates high RPM. Each of the 8 cylinders displaces 37.6 ci (617 cc).
9.521:1 on iron heads is in the range that usually runs on pump premium; iron holds heat, so treat it as the less forgiving side of that range.
It is one of 6 engines in the Pontiac 301ci family, all of them 301 ci — the differences between them are in compression, heads and rating, not displacement.
| Displacement | 301 ci / 4.9 L |
|---|---|
| Bore | 4.002" |
| Stroke | 3.01" |
| Cylinders | 8 |
| Configuration | V8 |
| Compression ratio | 9.521:1 |
| Rod length | 6.05" |
| Rod ratio | 2.01 |
| Bore/stroke ratio | 1.33 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Advertised HP | 135 hp |
| Years | 1977 |
| Bore/stroke character | 1.330 — oversquare — bore exceeds stroke, which favours higher RPM and larger valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,010 ft/min — conservative for a street engine |
| Rod ratio | 2.01 — long — less side loading on the cylinder wall, favours high RPM |
| Displacement per cylinder | 37.6 ci |
| Static compression | 9.521:1 — in the range that usually runs on pump premium |
| Intake valve diameter | 1.72" |
|---|---|
| Exhaust valve diameter | 1.5" |
Each link opens the calculator with this engine's specs already filled in.