See other engines in this family
Subaru EJ engine specs: 2.0L (122 ci) 4-cylinder, 220-280 hp. Used in the Subaru WRX. Bore and stroke 92 x 75 mm, 8:1 compression. DOHC.
The Subaru EJ has more bore than stroke (3.622" against 2.9528", 22.7% oversquare), the layout that likes rpm and big valves. With a 2.9528" stroke the 122 can turn about 8,150 rpm before piston speed reaches 4,000 ft/min, so springs and airflow set the 122's rev limit, not the bottom end. The 122's rod ratio of 1.74 is in the normal range for a production engine. Each of the 122's 4 cylinders displaces 30.5 ci (500 cc).
At 8:1 with aluminum heads, the 122 is low by modern standards and generally runs fine on regular.
Of the 37 engines in the EJ family, the 122 falls between the 91.1 ci and 150.2 ci versions. The factory built 7 versions on these dimensions, rated from 220 to 280 hp. It came in the Subaru Impreza WRX, Subaru Forester XT, Subaru Legacy RS and 13 others.
| Displacement | 122 ci / 2 L |
|---|---|
| Bore | 3.622" |
| Stroke | 2.9528" |
| Cylinders | 4 |
| Compression ratio | 8:1 |
| Rod length | 5.138" |
| Rod ratio | 1.74 |
| Bore/stroke ratio | 1.227 |
| Deck height | 7.913" |
| Block material | aluminum |
|---|---|
| Head material | aluminum |
| Valvetrain | DOHC |
| Fuel type | gas |
| Firing order | 1-3-2-4 |
| Advertised HP | 220–280 hp |
| Intake valve clearance | 0.18-0.22 mm (0.0071-0.0087"), engine cold |
|---|---|
| Exhaust valve clearance | 0.23-0.27 mm (0.0091-0.0106"), engine cold |
| Valve adjustment | Selective-size buckets (the bucket is the shim) |
Factory service manual specs. To work out new shims, use the valve shim calculator.
| Year | Version | HP @ rpm | Torque @ rpm | Comp. |
|---|---|---|---|---|
| 2002 | EJ205 net | 227 @ 6000 | 217 lb-ft @ 4000 | 8:1 |
| 2003 | EJ205 net | 227 @ 6000 | 217 lb-ft @ 4000 | 8:1 |
| 2004 | EJ205 net | 227 @ 6000 | 217 lb-ft @ 4000 | 8:1 |
| 2005 | EJ205 net | 227 @ 6000 | 217 lb-ft @ 4000 | 8:1 |
From the factory spec sheet.
| Bore/stroke character | 1.227, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 2,953 ft/min (easy for a street engine) |
| Rod ratio | 1.74 (normal for a production engine) |
| Displacement per cylinder | 30.5 ci |
| Static compression | 8:1 (fine on regular) |
Each calculator below starts with the 122's numbers filled in.
Same bore, stroke and compression across these 7 122 versions; only the model year and the factory rating differ.
| Year | Advertised HP | Code |
|---|---|---|
| — | 220 hp | EJ20G |
| — | 220 hp | EJ20G/K/R/T (Turbo JDM) |
| — | 220 hp | EJ20G, EJ20G/K/R/T (Turbo JDM) |
| — | 227 hp | EJ205 |
| — | 227 hp | EJ205 (Turbo USDM) |
| — | 227 hp | EJ205, EJ205 (Turbo USDM) |
| — | 280 hp | EJ207, EJ20K, EJ20K/EJ207 |
1 factory vehicle, 2002–2005. Each year opens that model's engine table.