16 Mercury Windsor engines from 1963–2001 in one chart: 221 to 351 cubic inches, bores from 3.500" to 4.000" and strokes from 2.870" to 3.500".
For each engine's history, factory cars and rebuild specs, open its page from the chart or see the Mercury Windsor family overview.
| Engine | Size | Bore × stroke | Rod length | Rod ratio | Deck height | Compression | Horsepower | Years | Block |
|---|---|---|---|---|---|---|---|---|---|
| 221 | 3.6 L / 221 ci | 3.500" × 2.870" | — | — | 8.206" | 8.7:1 | 145 | — | Cast iron |
| Windsor (1980–1982) | 4.2 L / 255 ci | 3.681" × 3.000" | — | — | 8.206" | — | — | 1980–1982 | Cast iron |
| 255 | 4.2 L / 255 ci | 3.681" × 3.000" | — | — | 8.206" | 8.2:1 | 115–120 | — | Cast iron |
| Windsor (1963–1964) | 4.2 L / 260 ci | 3.800" × 2.870" | 5.155" | 1.80 | 8.206" | — | 164 | 1963–1964 | Cast iron |
| 260 | 4.2 L / 260 ci | 3.800" × 2.870" | 5.155" | 1.80 | 8.206" | 8.8:1 | 164 | — | Cast iron |
| Windsor (1964–1967) | 4.7 L / 289 ci | 4.000" × 2.870" | 5.155" | 1.80 | 8.206" | — | 200–225 | 1964–1967 | Cast iron |
| 289 | 4.7 L / 289 ci | 4.000" × 2.870" | 5.155" | 1.80 | 8.206" | 9.3:1 | 200 | — | Cast iron |
| 289 HiPo | 4.7 L / 289 ci | 4.000" × 2.870" | 5.155" | 1.80 | 8.206" | 10.5:1 | 271 | — | Cast iron |
| J-code | 5.0 L / 302 ci | 4.000" × 3.000" | 5.090" | 1.70 | 8.206" | 10:1 | 230 | 1968 | Cast iron |
| Windsor (1968–1986) | 5.0 L / 302 ci | 4.000" × 3.000" | 5.090" | 1.70 | 8.206" | — | 140–230 | 1968–1986 | Cast iron |
| G-code | 5.0 L / 302 ci | 4.000" × 3.000" | 5.155" | 1.72 | — | — | 290 | 1969–1970 | Cast iron |
| Windsor 5.0 | 5.0 L / 302 ci | 4.000" × 3.000" | 5.090" | 1.70 | 8.206" | 8.9:1 | 129–160 | 1979–1991 | Cast iron |
| Windsor | 5.0 L / 302 ci | 4.000" × 3.000" | 5.090" | 1.70 | 8.206" | — | — | 1997–2001 | Cast iron |
| 302 | 5.0 L / 302 ci | 4.000" × 3.000" | 5.090" | 1.70 | 8.206" | 10:1 | 230 | — | Cast iron |
| 351W | 5.8 L / 351 ci | 4.000" × 3.500" | 5.956" | 1.70 | — | 9.5:1 | 250 | — | Cast iron |
| 351W | 5.8 L / 351 ci | 4.000" × 3.500" | 5.956" | 1.70 | — | 10.7:1 | 290 | — | Cast iron |
Years are model years. Where a Mercury Windsor shows a horsepower range, its factory rating changed by year or application. Click any Mercury Windsor code for its full spec page.
4 of the 6 bore and stroke combinations in the Mercury Windsor are shared by more than one code. Those Mercury Windsor engines have the same crank throw and bore size, so the same displacement, even where heads, cam and compression differ:
| Bore | Engines |
|---|---|
| 3.500" | 221 |
| 3.681" | Windsor (1980–1982), 255 |
| 3.800" | Windsor (1963–1964), 260 |
| 4.000" | Windsor (1964–1967), 289, 289 HiPo, J-code, Windsor (1968–1986), G-code, Windsor 5.0, Windsor, 302, 351W |
| Stroke | Engines |
|---|---|
| 2.870" | 221, Windsor (1963–1964), 260, Windsor (1964–1967), 289, 289 HiPo |
| 3.000" | Windsor (1980–1982), 255, J-code, Windsor (1968–1986), G-code, Windsor 5.0, Windsor, 302 |
| 3.500" | 351W |
From the 221 at 3.6 L / 221 ci to the 351W at 5.8 L / 351 ci, across 6 bore and stroke combinations.
The Windsor (1964–1967), at 4.000". It shares that bore with the 289, 289 HiPo, J-code, Windsor (1968–1986).
The 351W, at 3.500".
The 351W, with a 5.956" rod (a 1.70 rod ratio).
The 351W, at 10.7:1.