Mercury G-code Specs: 4.00 x 3.00 in, 290 hp

See other engines in this family

Mercury G-code specs: 302 ci (5.0L) 8-cylinder, 4.00 x 3.00 in (101.6 x 76.2 mm) bore and stroke. Rated 290 hp, 1969–1970. Used in the Mercury Cougar. OHV.

The Mercury G-code is oversquare: its 4" bore is 33.3% bigger than its 3" stroke. The big bore leaves room for big valves, so the G-code leans toward airflow and rpm. With a 3" stroke the G-code can turn about 8,000 rpm before piston speed reaches 4,000 ft/min, so springs and airflow set the G-code's rev limit, not the bottom end. The G-code's rod ratio of 1.718 is in the normal range for a production engine. Each of the G-code's 8 cylinders displaces 37.8 ci (619 cc).

Of the 19 engines in the Windsor family, the G-code falls between the 221 ci and 351 ci versions. The factory built 2 versions on these dimensions, rated at 290 hp, from 1969 to 1970.

Dimensions

Displacement302 ci / 5 L
Bore4"
Stroke3"
Cylinders8
ConfigurationV8
Compression ratio10.5–10.6:1 (published figures vary)
Rod length5.155"
Rod ratio1.718
Bore/stroke ratio1.333

Construction

Block materialcast iron
Head materialcast iron
ValvetrainOHV
Fuel typegas
Redline6,150 rpm
Advertised HP290 hp
Years1969–1970

Factory ratings and camshaft by year

YearVersionHP @ rpmTorque @ rpmComp.Duration int / exhValve lift int / exhLSA
1969gross290 @ 5800290 lb-ft @ 430010.5:1—0.519"—
1970gross290 @ 5800290 lb-ft @ 430010.6:1———

From the factory spec sheet. Durations: advertised, not at .050". LSA: worked out from the valve timing.

What these numbers mean

Bore/stroke character1.333, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,000 ft/min (easy for a street engine)
Rod ratio1.718 (normal for a production engine)
Displacement per cylinder37.8 ci

Run the numbers for this engine

Each calculator below starts with the G-code's numbers filled in.

Variants sharing these dimensions (2)

Same bore, stroke and compression across these 2 G-code versions; only the model year and the factory rating differ.

YearAdvertised HPCode
1969290 hpG-code
1970290 hpG-code

What cars have the G-code?

1 factory vehicle, 1969–1970. Each year opens that model's engine table.

Similar engines

← All Windsor engines