See other engines in this family
Chevrolet LT6 specs: 262 ci (4.3L) 6-cylinder, 4.057 x 3.385 in (103 x 86 mm) bore and stroke, 22.8:1 compression. Rated 85 hp, 1982–1983.
With a 4.057" bore over a 3.385" stroke, the Chevrolet Oldsmobile Diesel (LT6) is oversquare by 19.9%, which favors breathing and revs over crank leverage on the LT6. With a 3.385" stroke the LT6 can turn about 7,100 rpm before piston speed reaches 4,000 ft/min, so springs and airflow set the LT6's rev limit, not the bottom end. Each of the LT6's 6 cylinders displaces 43.7 ci (716 cc).
The LT6 is a diesel, so its 22.8:1 compression is what lights the fuel, with no knock limit to manage like a gas engine has.
Of the 5 engines in the Oldsmobile Diesel family, the LT6 is the smallest at 262 ci. The factory built 2 versions on these dimensions, rated at 85 hp, from 1982 to 1983.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4.057" |
| Stroke | 3.385" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 22.8:1 |
| Bore/stroke ratio | 1.199 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | diesel |
| Advertised HP | 85 hp |
| Years | 1982–1983 |
| Year | Version | HP @ rpm | Torque @ rpm | Comp. |
|---|---|---|---|---|
| 1983 | LT7 net | 85 @ 3600 | 165 lb-ft @ 1600 | 22.8:1 |
From the factory spec sheet.
| Bore/stroke character | 1.199, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,385 ft/min (easy for a street engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 22.8:1 (premium or better) |
Each calculator below starts with the LT6's numbers filled in.
Same bore, stroke and compression across these 2 LT6 versions; only the model year and the factory rating differ.
| Year | Advertised HP | Code |
|---|---|---|
| 1982 | 85 hp | LT6 |
| 1983 | 85 hp | LT6 |
4 factory vehicles, 1982–1985. Each year opens that model's engine table.