Chrysler 426ci 4.25" bore Specs: 4.25 x 3.75 in

See other engines in this family

Chrysler 426ci 4.25" bore specs: 426 ci (7.0L) 8-cylinder, 4.25 x 3.75 in (108 x 95.3 mm) bore and stroke. Built 1962–1964. Rod ratio and piston speed.

The Chrysler 426ci 4.25" bore has more bore than stroke (4.25" against 3.75", 13.3% oversquare), the layout that likes rpm and big valves. Spin the 426 to about 6,400 rpm and its 3.75" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 426's 1.805 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 426's 8 cylinders displaces 53.3 ci (873 cc).

The Chrysler 426ci family has 8 engines, all 426 ci, so what sets the 426 apart is its compression, heads and power rating. The factory built 4 versions on these dimensions, from 1962 to 1964.

Dimensions

Displacement426 ci / 7 L
Bore4.25"
Stroke3.75"
Cylinders8
NHRA blueprint max. compression11:1
Rod length6.77"
Rod ratio1.805
Bore/stroke ratio1.133
Piston deck clearance0.051" below deck

Construction

Induction1-4
NHRA filed HP415 hp
Years1962–1964

What these numbers mean

Bore/stroke character1.133, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,750 ft/min (typical performance street range)
Rod ratio1.805 (long, less side load on the bores)
Displacement per cylinder53.3 ci

Cylinder head

Intake valve diameter2.08"
Exhaust valve diameter1.6"
Chamber volume71 cc
Rocker ratio1.5:1
Lifter typemechanical

Run the numbers for this engine

These open with the 426's bore, stroke and compression already entered.

Variants sharing these dimensions (4)

All 4 versions of the 426 below have the same bore, stroke and compression, and differ only in year and rated power.

YearNHRA filed HPCode
1962373 hp—
1962413 hp—
1963415 hp—
1964415 hp—

Similar engines

← All Chrysler 426ci engines