See other engines in this family
The same engine also has a main page: Chrysler 426ci 4.25" bore.
Chrysler 426ci 4.25" bore specs: 426 ci (7.0L) 8-cylinder, 4.25 x 3.75 in (108 x 95.3 mm) bore and stroke. Built 1962. Rod ratio and piston speed.
The Chrysler 426ci 4.25" bore has more bore than stroke (4.25" against 3.75", 13.3% oversquare), the layout that likes rpm and big valves. Spin the 426 to about 6,400 rpm and its 3.75" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 426's 1.805 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 426's 8 cylinders displaces 53.3 ci (873 cc).
The Chrysler 426ci family has 8 engines, all 426 ci, so what sets the 426 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, in 1962.
| Displacement | 426 ci / 7 L |
|---|---|
| Bore | 4.25" |
| Stroke | 3.75" |
| Cylinders | 8 |
| NHRA blueprint max. compression | 12:1 |
| Rod length | 6.77" |
| Rod ratio | 1.805 |
| Bore/stroke ratio | 1.133 |
| Piston deck clearance | 0.018" below deck |
| Induction | 1-4 |
|---|---|
| NHRA filed HP | 421 hp |
| Years | 1962 |
| Bore/stroke character | 1.133, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,750 ft/min (typical performance street range) |
| Rod ratio | 1.805 (long, less side load on the bores) |
| Displacement per cylinder | 53.3 ci |
| Intake valve diameter | 2.08" |
|---|---|
| Exhaust valve diameter | 1.6" |
| Chamber volume | 81 cc |
| Rocker ratio | 1.5:1 |
| Lifter type | mechanical |
These open with the 426's bore, stroke and compression already entered.
All 2 versions of the 426 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1962 | 385 hp | — |
| 1962 | 421 hp | — |