Chrysler Mopar Crate and Drag Pak 4.125" bore Specs: 4.125 x 4.00 in, 450-460 hp

See other engines in this family

Chrysler Mopar Crate and Drag Pak 4.125" bore specs: 426 ci (7.0L) 8-cylinder, 4.125 x 4.00 in (104.8 x 101.6 mm) bore and stroke. Rated 450-460 hp. OHV.

Bore and stroke on the Chrysler Mopar Crate and Drag Pak 4.125" bore are within 3.1% of each other (4.125" by 4"), so it is neither a torque engine nor a high-revving one by layout. Spin the 426 to about 6,000 rpm and its 4" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 426's 1.5 rod ratio is short, with more rod angle and side load than most, so piston speed deserves a close look on a build. Each of the 426's 8 cylinders displaces 53.3 ci (873 cc).

Of the 6 engines in the Mopar Crate and Drag Pak family, the 426 is the biggest at 426 ci. The factory built 3 versions on these dimensions, rated from 450 to 460 hp, from 2009 to 2015.

Dimensions

Displacement426 ci / 7 L
Bore4.125"
Stroke4"
Cylinders8
ConfigurationV8
Rod length6"
Rod ratio1.5
Bore/stroke ratio1.031

Construction

Block materialcast iron
Head materialcast iron
ValvetrainOHV
Fuel typegas
Firing order1-8-4-3-6-5-7-2
NHRA rating (race package)450–460 hp
Years2009–2015

What these numbers mean

Bore/stroke character1.031, square (within 5%)
Mean piston speed at 6,000 RPM4,000 ft/min (typical performance street range)
Rod ratio1.5 (short, more side load (common in strokers))
Displacement per cylinder53.3 ci

Cylinder head

Intake valve diameter2.144"
Exhaust valve diameter1.659"

Run the numbers for this engine

Each calculator below starts with the 426's numbers filled in.

Variants sharing these dimensions (3)

Same bore, stroke and compression across these 3 426 versions; only the model year and the factory rating differ.

YearAdvertised HPCode
2009450 hp—
2010450 hp—
2015460 hp—

Similar engines

← All Mopar Crate and Drag Pak engines