See other engines in this family
The same engine also has a main page: Chrysler 97ci 3.03" bore.
Chrysler 98ci 3.03" bore specs: 98 ci (1.6L) 4-cylinder, 3.03 x 3.39 in (77 x 86.1 mm) bore and stroke. Built 1978–1980. Rod ratio and piston speed.
The Chrysler 98ci 3.03" bore has more stroke than bore (3.39" against 3.03", 10.6% undersquare), a torque layout rather than a revving one. The 98's 3.39" stroke doesn't reach 4,000 ft/min of piston speed until about 7,100 rpm, so the valvetrain and breathing run out before the pistons do. The 98's 1.785 rod ratio is long for a production engine: the rods lean less, side load on the bores drops, and the piston moves more gently past TDC. Each of the 98's 4 cylinders displaces 24.5 ci (401 cc).
The factory built 4 versions on these dimensions, from 1978 to 1980.
| Displacement | 98 ci / 1.6 L |
|---|---|
| Bore | 3.03" |
| Stroke | 3.39" |
| Cylinders | 4 |
| NHRA blueprint max. compression | 9:1 |
| Rod length | 6.051" |
| Rod ratio | 1.785 |
| Bore/stroke ratio | 0.894 |
| Piston deck clearance | 0.000" (zero deck) |
| Induction | 1-2 |
|---|---|
| NHRA filed HP | 80 hp |
| Years | 1978–1980 |
| Bore/stroke character | 0.894, undersquare, favors low-end torque |
|---|---|
| Mean piston speed at 6,000 RPM | 3,390 ft/min (easy for a street engine) |
| Rod ratio | 1.785 (long, less side load on the bores) |
| Displacement per cylinder | 24.5 ci |
| Intake valve diameter | 1.5" |
|---|---|
| Exhaust valve diameter | 1.224" |
| Chamber volume | 35.5 cc |
| Rocker ratio | 1.55:1 |
| Lifter type | mechanical |
These open with the 98's bore, stroke and compression already entered.
All 4 versions of the 98 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | NHRA filed HP | Code |
|---|---|---|
| 1978 | 77 hp | — |
| 1979 | 77 hp | — |
| 1979 | 80 hp | — |
| 1980 | 80 hp | — |