Chrysler Mopar Crate and Drag Pak 4.000" bore Specs: 4.00 x 3.58 in, 275 hp

See other engines in this family

Chrysler Mopar Crate and Drag Pak 4.000" bore specs: 360 ci (5.9L) 8-cylinder, 4.00 x 3.58 in (101.6 x 90.9 mm) bore and stroke. Rated 275 hp, 2009–2010.

With a 4" bore over a 3.58" stroke, the Chrysler Mopar Crate and Drag Pak 4.000" bore is oversquare by 11.7%, which favors breathing and revs over crank leverage on the 360. Piston speed on the 360 (3.58" stroke) gets to 4,000 ft/min near 6,700 rpm, the usual ceiling for stock rods and pistons. The 360's rod ratio of 1.71 is in the normal range for a production engine. Each of the 360's 8 cylinders displaces 45.0 ci (737 cc).

Of the 6 engines in the Mopar Crate and Drag Pak family, the 360 falls between the 345 ci and 426 ci versions. The factory built 2 versions on these dimensions, rated at 275 hp, from 2009 to 2010.

Dimensions

Displacement360 ci / 5.9 L
Bore4"
Stroke3.58"
Cylinders8
ConfigurationV8
NHRA blueprint max. compression11.4:1
Rod length6.123"
Rod ratio1.71
Bore/stroke ratio1.117
Piston deck clearance0.004" above deck

Construction

Block materialcast iron
Head materialcast iron
ValvetrainOHV
Fuel typegas
NHRA rating (race package)275 hp
Years2009–2010

What these numbers mean

Bore/stroke character1.117, oversquare, favors rpm and big valves
Mean piston speed at 6,000 RPM3,580 ft/min (typical performance street range)
Rod ratio1.71 (normal for a production engine)
Displacement per cylinder45.0 ci

Cylinder head

Intake valve diameter2.02"
Exhaust valve diameter1.6"

Run the numbers for this engine

These open with the 360's bore, stroke and compression already entered.

Variants sharing these dimensions (2)

All 2 versions of the 360 below have the same bore, stroke and compression, and differ only in year and rated power.

YearAdvertised HPCode
2009275 hp—
2010275 hp—

Similar engines

← All Mopar Crate and Drag Pak engines