See other engines in this family
Chrysler Mopar Crate and Drag Pak (2015) · 430 hp specs: 392 ci (6.4L) 8-cylinder, 4.055 x 3.80 in (103 x 96.5 mm) bore and stroke. Rated 430 hp, 2015. OHV.
The Chrysler Mopar Crate and Drag Pak (2015) · 430 hp is oversquare: its 4.055" bore is 6.7% bigger than its 3.8" stroke. The big bore leaves room for big valves, so the 392 leans toward airflow and rpm. The 392's 3.8" stroke reaches 4,000 ft/min of piston speed around 6,300 rpm, which is about where a production bottom end tops out. The 392's rod ratio of 1.605 is in the normal range for a production engine. Each of the 392's 8 cylinders displaces 49.0 ci (803 cc).
Of the 6 engines in the Mopar Crate and Drag Pak family, the 392 falls between the 345 ci and 426 ci versions.
| Displacement | 392 ci / 6.4 L |
|---|---|
| Bore | 4.055" |
| Stroke | 3.8" |
| Cylinders | 8 |
| Configuration | V8 |
| Rod length | 6.1" |
| Rod ratio | 1.605 |
| Bore/stroke ratio | 1.067 |
| Piston deck clearance | 0.000" (zero deck) |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-8-4-3-6-5-7-2 |
| NHRA rating (race package) | 430 hp |
| Years | 2015 |
| Bore/stroke character | 1.067, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,800 ft/min (typical performance street range) |
| Rod ratio | 1.605 (normal for a production engine) |
| Displacement per cylinder | 49.0 ci |
| Intake valve diameter | 2.2" |
|---|---|
| Exhaust valve diameter | 1.65" |
Each calculator below starts with the 392's numbers filled in.