Ford Coyote 3.631" bore Specs: 3.631 x 3.649 in, 500-565 hp

See other engines in this family

Ford Coyote 3.631" bore specs: 302 ci (4.9L) 8-cylinder, 3.631 x 3.649 in (92.2 x 92.7 mm) bore and stroke. Rated 500-565 hp, 2013–2016.

The Ford Coyote 3.631" bore is close to square: 3.631" bore against 3.649" stroke, within 0.5%, so the 302 sits between a revving layout and a torque layout. The 302's 3.649" stroke reaches 4,000 ft/min of piston speed around 6,600 rpm, which is about where a production bottom end tops out. The 302's rod ratio of 1.626 is in the normal range for a production engine. Each of the 302's 8 cylinders displaces 37.8 ci (619 cc).

Of the 17 engines in the Coyote family, the 302 is the smallest at 302 ci. The factory built 4 versions on these dimensions, rated from 500 to 565 hp, from 2013 to 2016.

Dimensions

Displacement302 ci / 4.9 L
Bore3.631"
Stroke3.649"
Cylinders8
NHRA blueprint max. compression9.8:1
Rod length5.933"
Rod ratio1.626
Bore/stroke ratio0.995
Piston deck clearance0.000" (zero deck)

Construction

Block materialcast iron
Head materialcast iron
ValvetrainDOHC
Fuel typegas
NHRA rating (race package)500–565 hp
Years2013–2016

What these numbers mean

Bore/stroke character0.995, square (within 5%)
Mean piston speed at 6,000 RPM3,649 ft/min (typical performance street range)
Rod ratio1.626 (normal for a production engine)
Displacement per cylinder37.8 ci

Run the numbers for this engine

These open with the 302's bore, stroke and compression already entered.

Variants sharing these dimensions (4)

All 4 versions of the 302 below have the same bore, stroke and compression, and differ only in year and rated power.

YearAdvertised HPCode
2013500 hp—
2014525 hp—
2014560 hp—
2016565 hp—

What cars have the Coyote · 3.631" × 3.649"?

1 factory vehicle, 2015–2017. Each year opens that model's engine table.

Similar engines

← All Coyote engines