See other engines in this family
Chevrolet Vortec 4300 (4.3L V6) (1996) · 170 hp specs: 262 ci (4.3L) 6-cylinder, 4.00 x 3.484 in (101.6 x 88.5 mm) bore and stroke, 9.2:1 compression.
The Chevrolet Vortec 4300 (4.3L V6) (1996) · 170 hp has more bore than stroke (4" against 3.484", 14.8% oversquare), the layout that likes rpm and big valves. Spin the 262 to about 6,900 rpm and its 3.484" stroke is moving the pistons at 4,000 ft/min, roughly the safe limit for a stock bottom end. The 262's rod ratio of 1.636 is in the normal range for a production engine. Each of the 262's 6 cylinders displaces 43.7 ci (716 cc).
At 9.2:1 with iron heads, the 262 is low by modern standards and generally runs fine on regular.
The Vortec 4300 (4.3L V6) family has 12 engines, all 262 ci, so what sets the 262 apart is its compression, heads and power rating.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4" |
| Stroke | 3.484" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 9.2:1 * |
| Rod length | 5.7" |
| Rod ratio | 1.636 |
| Bore/stroke ratio | 1.148 |
| Piston deck clearance | 0.025" below deck |
* Compression ratio: single reference, unconfirmed.
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-6-5-4-3-2 |
| Advertised HP | 170 hp |
| Years | 1996 |
| Bore/stroke character | 1.148, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,484 ft/min (easy for a street engine) |
| Rod ratio | 1.636 (normal for a production engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 9.2:1 (fine on regular) |
| Intake valve diameter | 1.94" |
|---|---|
| Exhaust valve diameter | 1.5" |
Each calculator below starts with the 262's numbers filled in.