See other engines in this family
Chevrolet Vortec 4300 (4.3L V6) (1988) · 140 hp specs: 262 ci (4.3L) 6-cylinder, 4.001 x 3.48 in (101.6 x 88.4 mm) bore and stroke, 9.3:1 compression.
With a 4.001" bore over a 3.48" stroke, the Chevrolet Vortec 4300 (4.3L V6) (1988) · 140 hp is oversquare by 15.0%, which favors breathing and revs over crank leverage on the 262. Piston speed on the 262 (3.48" stroke) gets to 4,000 ft/min near 6,900 rpm, the usual ceiling for stock rods and pistons. The 262's rod ratio of 1.638 is in the normal range for a production engine. Each of the 262's 6 cylinders displaces 43.7 ci (716 cc).
At 9.3:1 with iron heads, the 262 is low by modern standards and generally runs fine on regular.
The Vortec 4300 (4.3L V6) family has 12 engines, all 262 ci, so what sets the 262 apart is its compression, heads and power rating.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4.001" |
| Stroke | 3.48" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 9.3:1 |
| NHRA blueprint max. compression | 10.9:1 |
| Rod length | 5.7" |
| Rod ratio | 1.638 |
| Bore/stroke ratio | 1.15 |
| Piston deck clearance | 0.002" below deck |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-6-5-4-3-2 |
| Advertised HP | 140 hp |
| Years | 1988 |
| Year | Version | HP @ rpm | Torque @ rpm | Comp. |
|---|---|---|---|---|
| 1988 | LB4 net | 140 @ 4200 | 225 lb-ft @ 2000 | 9.3:1 |
From the factory spec sheet.
| Bore/stroke character | 1.150, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,480 ft/min (easy for a street engine) |
| Rod ratio | 1.638 (normal for a production engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 9.3:1 (fine on regular) |
Each calculator below starts with the 262's numbers filled in.
1 factory vehicle, 1988. Each year opens that model's engine table.