See other engines in this family
Chevrolet LB4 specs: 262 ci (4.3L) 6-cylinder, 4.00 x 3.48 in (101.6 x 88.4 mm) bore and stroke, 9.3:1 compression. Rated 130-165 hp, 1986–1995.
The Chevrolet Vortec 4300 (4.3L V6) (LB4) is oversquare: its 4" bore is 14.9% bigger than its 3.48" stroke. The big bore leaves room for big valves, so the LB4 leans toward airflow and rpm. The LB4's 3.48" stroke reaches 4,000 ft/min of piston speed around 6,900 rpm, which is about where a production bottom end tops out. The LB4's rod ratio of 1.638 is in the normal range for a production engine. Each of the LB4's 6 cylinders displaces 43.7 ci (716 cc).
At 9.3:1 with iron heads, the LB4 is low by modern standards and generally runs fine on regular.
The Vortec 4300 (4.3L V6) family has 12 engines, all 262 ci, so what sets the LB4 apart is its compression, heads and power rating. The factory built 22 versions on these dimensions, rated from 130 to 165 hp, from 1986 to 1995.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4" |
| Stroke | 3.48" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 9.3:1 |
| Rod length | 5.7" |
| Rod ratio | 1.638 |
| Bore/stroke ratio | 1.149 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-6-5-4-3-2 |
| Advertised HP | 130–165 hp |
| Years | 1986–1995 |
| Engine weight | 425–450 lb (approximate; published figures vary with what is attached) |
| Piston-to-wall clearance (1985/88-1995 (LB1/LB4 TBI; 1992-95 CPI VIN W)) | 0.0007–0.0017" |
|---|---|
| Ring end gap (1988-1995) | top 0.010–0.020", second —, oil 0.015–0.055" |
| Year | Version | HP @ rpm | Torque @ rpm | Comp. |
|---|---|---|---|---|
| 1986 | LB4 net | 140 @ 4000 | 225 lb-ft @ 2000 | 9.3:1 |
| 1987 | LB4 net | 140 @ 4200 | 225 lb-ft @ 2000 | 9.3:1 |
| 1988 | LB4 net | 145 @ 4200 | 225 lb-ft @ 2000 | 9.3:1 |
| 1990 | LB4 net | 140 @ 4000 | 225 lb-ft @ 2000 | 9.3:1 |
| 1990 | LB4 net | 160 @ 4000 | 235 lb-ft @ 2400 | — |
| 1991 | LB4 net | 160 @ 4000 | 235 lb-ft @ 2400 | — |
| 1992 | LB4 net | 150 @ 4000 | 230 lb-ft @ 2400 | — |
| 1992 | LB4 net | 160 @ 4000 | 235 lb-ft @ 2400 | — |
| 1993 | LB4 net | 165 @ 4000 | 235 lb-ft @ 2000 | — |
| 1994 | LB4 net | 165 @ 4000 | 235 lb-ft @ 2000 | — |
| 1995 | LB4 net | 160 @ 4000 | 235 lb-ft @ 2400 | — |
From the factory spec sheet.
| Bore/stroke character | 1.149, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,480 ft/min (easy for a street engine) |
| Rod ratio | 1.638 (normal for a production engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 9.3:1 (fine on regular) |
Each calculator below starts with the LB4's numbers filled in.
Same bore, stroke and compression across these 22 LB4 versions; only the model year and the factory rating differ.
| Year | Advertised HP | Code |
|---|---|---|
| 1986 | 130 hp | LB4 |
| 1986 | 140 hp | LB4 |
| 1987 | 140 hp | LB4 |
| 1987 | 145 hp | LB4 |
| 1987 | 160 hp | LB4 |
| 1988 | 145 hp | LB4 |
| 1988 | 160 hp | LB4 |
| 1989 | 140 hp | LB4 |
| 1989 | 160 hp | LB4 |
| 1990 | 140 hp | LB4 |
| 1990 | 160 hp | LB4 |
| 1991 | 160 hp | LB4 |
| 1992 | — | LB4 |
| 1992 | 150 hp | LB4 |
| 1992 | 160 hp | LB4 |
| 1993 | — | LB4 |
| 1993 | 165 hp | LB4 |
| 1994 | — | LB4 |
| 1994 | 165 hp | LB4 |
| 1995 | — | LB4 |
| 1995 | 155 hp | LB4 |
| 1995 | 160 hp | LB4 |
20 factory vehicles, 1985–1995. Each year opens that model's engine table.