See other engines in this family
Chevrolet LB1 specs: 262 ci (4.3L) 6-cylinder, 4.00 x 3.48 in (101.6 x 88.4 mm) bore and stroke, 9.3:1 compression. Rated 155 hp, 1985–1986.
The Chevrolet Vortec 4300 (4.3L V6) (LB1) is oversquare: its 4" bore is 14.9% bigger than its 3.48" stroke. The big bore leaves room for big valves, so the LB1 leans toward airflow and rpm. The LB1's 3.48" stroke reaches 4,000 ft/min of piston speed around 6,900 rpm, which is about where a production bottom end tops out. The LB1's rod ratio of 1.638 is in the normal range for a production engine. Each of the LB1's 6 cylinders displaces 43.7 ci (716 cc).
At 9.3:1 with iron heads, the LB1 is low by modern standards and generally runs fine on regular.
The Vortec 4300 (4.3L V6) family has 12 engines, all 262 ci, so what sets the LB1 apart is its compression, heads and power rating. The factory built 2 versions on these dimensions, rated at 155 hp, from 1985 to 1986.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4" |
| Stroke | 3.48" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 9.3:1 |
| Rod length | 5.7" |
| Rod ratio | 1.638 |
| Bore/stroke ratio | 1.149 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-6-5-4-3-2 |
| Advertised HP | 155 hp |
| Years | 1985–1986 |
| Engine weight | 425–450 lb (approximate; published figures vary with what is attached) |
| Piston-to-wall clearance (1985/88-1995 (LB1/LB4 TBI; 1992-95 CPI VIN W)) | 0.0007–0.0017" |
|---|
| Year | Version | HP @ rpm | Torque @ rpm | Comp. | Duration int / exh | Valve lift int / exh | LSA |
|---|---|---|---|---|---|---|---|
| 1986 | net | 155 @ 4000 | 230 lb-ft @ 2400 | 9.3:1 | 260° / 280° | — | 108° |
From the factory spec sheet. Durations: advertised, not at .050". LSA: worked out from the valve timing.
| Bore/stroke character | 1.149, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,480 ft/min (easy for a street engine) |
| Rod ratio | 1.638 (normal for a production engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 9.3:1 (fine on regular) |
These open with the LB1's bore, stroke and compression already entered.
All 2 versions of the LB1 below have the same bore, stroke and compression, and differ only in year and rated power.
| Year | Advertised HP | Code |
|---|---|---|
| 1985 | 155 hp | LB1 |
| 1986 | 155 hp | LB1 |
6 factory vehicles, 1985–1986. Each year opens that model's engine table.