Chrysler 105ci 3.13" bore Specs: 3.13 x 3.40 in

See other engines in this family

The same engine also has a main page: Chrysler 105ci 3.13" bore.

Chrysler 105ci 3.13" bore specs: 105 ci (1.7L) 4-cylinder, 3.13 x 3.40 in (79.5 x 86.4 mm) bore and stroke. Built 1982. Rod ratio and piston speed.

With a 3.4" stroke over a 3.13" bore, the Chrysler 105ci 3.13" bore is undersquare by 7.9%, so expect the 105 to pull low rather than rev. The 105's 3.4" stroke doesn't reach 4,000 ft/min of piston speed until about 7,050 rpm, so the valvetrain and breathing run out before the pistons do. The 105's rod ratio of 1.576 is in the normal range for a production engine. Each of the 105's 4 cylinders displaces 26.3 ci (430 cc).

The Chrysler 105ci family has 2 engines, all 105 ci, so what sets the 105 apart is its compression, heads and power rating.

Dimensions

Displacement105 ci / 1.7 L
Bore3.13"
Stroke3.4"
Cylinders4
NHRA blueprint max. compression9.8:1
Rod length5.36"
Rod ratio1.576
Bore/stroke ratio0.921
Piston deck clearance0.080" below deck

Construction

Induction1-2
NHRA filed HP63 hp
Years1982

What these numbers mean

Bore/stroke character0.921, undersquare, favors low-end torque
Mean piston speed at 6,000 RPM3,400 ft/min (easy for a street engine)
Rod ratio1.576 (normal for a production engine)
Displacement per cylinder26.3 ci

Cylinder head

Intake valve diameter1.345"
Exhaust valve diameter1.235"
Lifter typemechanical

Run the numbers for this engine

These open with the 105's bore, stroke and compression already entered.

Similar engines

← All Chrysler 105ci engines