See other engines in this family
Chevrolet L35 specs: 262 ci (4.3L) 6-cylinder, 4.00 x 3.48 in (101.6 x 88.4 mm) bore and stroke, 9.2:1 compression. Rated 180-200 hp, 1992–2004.
With a 4" bore over a 3.4803" stroke, the Chevrolet Vortec 4300 (4.3L V6) (L35) is oversquare by 14.9%, which favors breathing and revs over crank leverage on the L35. Piston speed on the L35 (3.4803" stroke) gets to 4,000 ft/min near 6,900 rpm, the usual ceiling for stock rods and pistons. The L35's rod ratio of 1.638 is in the normal range for a production engine. Each of the L35's 6 cylinders displaces 43.7 ci (716 cc).
At 9.2:1 with iron heads, the L35 is low by modern standards and generally runs fine on regular.
The Vortec 4300 (4.3L V6) family has 12 engines, all 262 ci, so what sets the L35 apart is its compression, heads and power rating. The factory built 32 versions on these dimensions, rated from 180 to 200 hp, from 1992 to 2004.
| Displacement | 262 ci / 4.3 L |
|---|---|
| Bore | 4" |
| Stroke | 3.4803" |
| Cylinders | 6 |
| Configuration | V6 |
| Compression ratio | 9.2:1 |
| Rod length | 5.7" |
| Rod ratio | 1.638 |
| Bore/stroke ratio | 1.149 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Firing order | 1-6-5-4-3-2 |
| Advertised HP | 180–200 hp |
| Years | 1992–2004 |
| Engine weight | 425–450 lb (approximate; published figures vary with what is attached) |
| Piston-to-wall clearance (1985/88-1995 (LB1/LB4 TBI; 1992-95 CPI VIN W)) | 0.0007–0.0017" |
|---|---|
| Piston-to-wall clearance (1996-1999 Vortec 4300 (L35/LF6/LU3)) | 0.0007–0.0020" |
| Ring end gap (1988-1995) | top 0.010–0.020", second —, oil 0.015–0.055" |
| Ring end gap (1996-1999 Vortec 4300) | top 0.010–0.016", second 0.018–0.026", oil 0.015–0.055" |
| Year | Version | HP @ rpm | Torque @ rpm | Comp. |
|---|---|---|---|---|
| 1992 | L35 net | 200 @ 4400 | 260 lb-ft @ 3600 | — |
| 1993 | L35 net | 200 @ 4400 | 260 lb-ft @ 3600 | — |
| 1996 | L35 net | 200 @ 4400 | 255 lb-ft @ 2800 | 9.2:1 |
| 1997 | LF6 net | 180 @ 4400 | 240 lb-ft @ 2800 | — |
| 1997 | L35 net | 190 @ 4400 | 250 lb-ft @ 2800 | — |
| 1998 | L35 net | 180 @ 4400 | 245 lb-ft @ 2800 | 9.2:1 |
| 1998 | L35 net | 190 @ 4400 | 250 lb-ft @ 2800 | 9.2:1 |
| 1998 | L35 net | 200 @ 4400 | 255 lb-ft @ 2800 | 9.2:1 |
| 2002 | L35 net | 180 @ 4400 * | 245 lb-ft @ 2800 * | — |
| 2002 | L35 net | 200 @ 4600 * | 260 lb-ft @ 2800 * | — |
| 2003 | L35 net | 180 @ 4400 * | 245 lb-ft @ 2800 * | — |
From the factory spec sheet. * Not yet confirmed.
| Bore/stroke character | 1.149, oversquare, favors rpm and big valves |
|---|---|
| Mean piston speed at 6,000 RPM | 3,480 ft/min (easy for a street engine) |
| Rod ratio | 1.638 (normal for a production engine) |
| Displacement per cylinder | 43.7 ci |
| Static compression | 9.2:1 (fine on regular) |
Each calculator below starts with the L35's numbers filled in.
Same bore, stroke and compression across these 32 L35 versions; only the model year and the factory rating differ.
| Year | Advertised HP | Code |
|---|---|---|
| 1992 | 195 hp | L35 |
| 1992 | 200 hp | L35 |
| 1993 | 195 hp | L35 |
| 1993 | 200 hp | L35 |
| 1994 | 195 hp | L35 |
| 1994 | 200 hp | L35 |
| 1995 | — | L35 |
| 1995 | 190 hp | L35 |
| 1996 | — | L35 |
| 1996 | 180 hp | L35 |
| 1996 | 190 hp | L35 |
| 1996 | 200 hp | L35 |
| 1997 | — | L35 |
| 1997 | 180 hp | L35 |
| 1997 | 190 hp | L35 |
| 1997 | 200 hp | L35 |
| 1998 | 180 hp | L35 |
| 1998 | 190 hp | L35 |
| 1998 | 200 hp | L35 |
| 1999 | 180 hp | L35 |
| 1999 | 190 hp | L35 |
| 1999 | 200 hp | L35 |
| 2000 | 180 hp | L35 |
| 2000 | 190 hp | L35 |
| 2000 | 200 hp | L35 |
| 2001 | 180 hp | L35 |
| 2001 | 190 hp | L35 |
| 2001 | 200 hp | L35 |
| 2002 | 180 hp | L35 |
| 2002 | 200 hp | L35 |
| 2003 | 180 hp | L35 |
| 2004 | 180 hp | L35 |
13 factory vehicles, 1992–2005. Each year opens that model's engine table.