See other engines in this family
Chevrolet 454ci (1975) · 215 hp specs: 454 ci (7.4L) 8-cylinder, 4.251 x 4.00 in (108 x 101.6 mm) bore and stroke, 8.851:1 compression. Rated 215 hp, 1975.
The Chevrolet 454ci (1975) · 215 hp is oversquare — the 4.251" bore exceeds the 4" stroke by 6.3% — a layout that favors airflow and RPM over leverage at the crank. The 4" stroke puts mean piston speed at 4,000 ft/min around 6,000 RPM, which is where a production bottom end is generally considered at its limit. A rod ratio of 1.534 is short — higher piston acceleration and more side-load, typical of stroker combinations and a reason to watch piston speed closely. Each of the 8 cylinders displaces 56.8 ci (930 cc).
8.851:1 on iron heads is low by modern standards and generally happy on regular pump fuel.
It is one of 11 engines in the Chevrolet 454ci family, all of them 454 ci — the differences between them are in compression, heads and rating, not displacement.
| Displacement | 454 ci / 7.4 L |
|---|---|
| Bore | 4.251" |
| Stroke | 4" |
| Cylinders | 8 |
| Configuration | V8 |
| Compression ratio | 8.851:1 |
| Rod length | 6.136" |
| Rod ratio | 1.534 |
| Bore/stroke ratio | 1.063 |
| Block material | cast iron |
|---|---|
| Head material | cast iron |
| Valvetrain | OHV |
| Fuel type | gas |
| Advertised HP | 215 hp |
| Years | 1975 |
| Bore/stroke character | 1.063 — oversquare — bore exceeds stroke, which favours higher RPM and larger valves |
|---|---|
| Mean piston speed at 6,000 RPM | 4,000 ft/min — in the range typical of performance street engines |
| Rod ratio | 1.534 — short — more side loading and piston dwell at TDC, typical of stroker combinations |
| Displacement per cylinder | 56.8 ci |
| Static compression | 8.851:1 — low by modern standards, generally happy on regular pump fuel |
Each link opens the calculator with this engine's specs already filled in.